Posted: Nov 12, 2015 7:32 am
by Adco
Emmeline wrote:

If you have time, could you explain how you made the planters?
Here is the rough jig used to cut the planks to the correct length.


20151102_181612.jpg (62.95 KiB) Viewed 1429 times

It is a bit crude but I don't have a proper workshop or workbench. Make a plan.

These are the panels ready to be joined to form a box shape.


20151102_181605.jpg (73.46 KiB) Viewed 1429 times

I chose T&G pieces because they will help to hold the box together. The Tongue piece as well as the Groove piece gets covered by the metal angle strip to neaten it up.